Product overview
--Power supply: DC 6V ( 4pcs AAA 1.5v dry battery).
--Touch keyboard: 1-9, *, 0, #.
--Standby current: 18uA (Sleep mode), 6mA ( working mode).
--Working current: 28mA ( working mode).
--Three LED indicator light: Red, Green, Blue.
--Low battery indication: If the battery is low, keypad would have beep indication after every signal transmission is
made.
-- Anti-vandal alarm. When the keypad is disassembled illegally, the buzzer will “beep” to alert.
-- 4 digits installer’s pin code and 4 digits user’s pin code setting.
-- RF learning code function: can learn commonly used fixed code, HCS301 rolling code.
-- Two channels RF 433MHZ transmitting.
-- Scrambled pin code.
-- Keypad buzzer on/off.
-- Keypad back light on/0ff.
-- Keypad security lock.
-- Factory default setting
-- Weatherproof
Operation Instruction:
-- When keypad enters programming mode, if the keypad does not receive the further command within 6s, keypad
would exit programming mode automatically.
-- When misoperating the keypad during programming, you can enter programming mode again after keypad exits
programming mode automatically.
-- When received the command “*”or “#”, keypad would receive the command then judge the command is correct or
not. If it is incorrect command, keypad would exit programming mode; or it is correct command, keypad would
operate further.
-- When programming, if user key in users’ pin code more than 4 digits, the keypad would recognize it as incorrect
operation, then exit programming mode.
-- When keypad in working mode, if the interval time between inputting each digit is more than 6s, keypad would
ignore the previous digit.
--if keypad is not learning any code, the red LED indicator would flash 5 times
--Power supply: DC 6V ( 4pcs AAA 1.5v dry battery).
--Touch keyboard: 1-9, *, 0, #.
--Standby current: 18uA (Sleep mode), 6mA ( working mode).
--Working current: 28mA ( working mode).
--Three LED indicator light: Red, Green, Blue.
--Low battery indication: If the battery is low, keypad would have beep indication after every signal transmission is
made.
-- Anti-vandal alarm. When the keypad is disassembled illegally, the buzzer will “beep” to alert.
-- 4 digits installer’s pin code and 4 digits user’s pin code setting.
-- RF learning code function: can learn commonly used fixed code, HCS301 rolling code.
-- Two channels RF 433MHZ transmitting.
-- Scrambled pin code.
-- Keypad buzzer on/off.
-- Keypad back light on/0ff.
-- Keypad security lock.
-- Factory default setting
-- Weatherproof
Operation Instruction:
-- When keypad enters programming mode, if the keypad does not receive the further command within 6s, keypad
would exit programming mode automatically.
-- When misoperating the keypad during programming, you can enter programming mode again after keypad exits
programming mode automatically.
-- When received the command “*”or “#”, keypad would receive the command then judge the command is correct or
not. If it is incorrect command, keypad would exit programming mode; or it is correct command, keypad would
operate further.
-- When programming, if user key in users’ pin code more than 4 digits, the keypad would recognize it as incorrect
operation, then exit programming mode.
-- When keypad in working mode, if the interval time between inputting each digit is more than 6s, keypad would
ignore the previous digit.
--if keypad is not learning any code, the red LED indicator would flash 5 times