Products
IR Transmitter
IR Transmitter for Garage Door Automation
  • Product Origin:

    Quanzhou
  • Item No.:

    JJ-EZY-OPEN
  • Shipping Port:

    Xiamen
  • Color:

    BLACK
  • Lead Time:

    2DAYS
  • Payment:

    T/T
  • Price:

    $18/20
  • Market Price:

    $18
Inquire
  • Product Details
1.Features:
Reader Working VoltageDC 12V24V
Reader Working Current30mA~50mA
Reader With Cards Working Distance5M
Reader Max. Memory: Unlimited Cards
Card Working VoltageDC 2*3V
Card Static Current9-13uA
Card Working Current8mA
Card Working Frequency433.92MHZ
Card Max. Memory: 6PCS Readers
Receiver Working VoltageDC or AC 12V24V
Receiver Working Current13mA
Receiver Max. Memory20PCS Readers

Receiver Output ModeSingle Channel Dry Contact

1. Pairing cards to the reader: press the code learning button on card
reader, the buzzer will have 2 beeps and system learning indicator LED will
light on and enter code learning mode. Then let the card face straight in a
line to the card reader, after 10s, buzzer will have 1 beep. System learning
indicator LED turn off, then exit the code learning mode. If learning
succeeded, indicator LED on card will flash.
One Card could work with maximum 6 different card readers at
same time. Only need repeat the above code learning method, then card
reader and card will match successfully. If the card match with 7th card
reader, then the 1st set card reader will be replaced with 7th automatically.
Function example: if you want install one card reader at house , and
another one install at company ,now you can just use one card work with
more than one card reader .
2. When the card receives the signal from the card reader that match
well, the card will transmit one 4s RF 433.92MHZ rolling code. Also even

the card receives the signal from card reader continuously, it will also only
transmit one time RF signal.
3. For easy programming the card to the external receiver, There is
one red button on card, press and hold the button (no more than 10s) , the
card will transmit the code continuously.
Press and hold the red button above 10s, card will move the all code of
all before card reader.
4. Receiver code learning: press and hold button 5s until LED light on,
then release button, press the card’s button to launch rolling code. If the
LED turn off, then code learning successfully. If not receive the correct
signal within 8s, it will exit the code learning mode automatically. Press
again the code learning button also can exit the code learning mode. If the
code learning memory more then 20pcs, LED will flash 5 times to mention
the code learning quantity have already full.
Function example: For one gate system , if you want install two card
reader for one entrance and one exit, Now you just need one receiver work
with two card reader, and connect the receiver to automation system
5. Receiver code move: press and hold button 10s, when LED flash fast
then release button, LED flash fast, then code move successfully.





Send Your Inquiry Directly To This Supplier

copyright © 2018 Giant Alarm System Co.,Ltd. All Rights Reserved dyyseo.com

top

the professional team to service!