Products
top Turbular Motor Receiver reviews
Turbular Motor Receiver
  • Product Origin:

    fujian,China
  • Item No.:

    JJ-EG-34
  • Shipping Port:

    Xiamen
  • Color:

    Black
  • Lead Time:

    5days
  • Payment:

    T/T
  • Price:

    $6.5/8
  • Market Price:

    $6.5
  • Price Range:

    7-8/200$
Inquire
  • Product Details

1.General

For safety, please read the manuals carefully before initial operation; making sure that the power is off before any operation.

The controlling signal may be interfered by other RF communication devices in same frequency range.

Prohibited using this to control any high risk industrial equipment or system (e.g.cranes).

Always install it indoor or under the rain cover protection.

2.Specification

Power Supply: AC220V/50HZ.

Loading Capacity: 2000W, AC240V.

Frequency: 433.92 MHz.

Memory Capacity: 50PCS rolling code remote control.

External button and photocell protection.

Working Temperature:  -20℃ to 60℃.

1.Learning/Removing Remote Control

Press and release the Learn button, LED indicator on, then press the button of remote control, LED indicator flashes 2 times, new remote has been learned successfully. There is no signal received from remote control within 10s, then LED indicator goes off and exit learning mode. If you have already learned 50PCS up to the maximum memory capacity, the next remote control will not be learned. The LED indicator will flash 5 times and exit learning mode.

3.1 Wireless self-learning

With this function, you could add the new remote control from the old remote control without accessing to the receiver. Press 2 and.3 button of old remote control at the same time for 6 seconds, then press any button of new remote control.


3.2 Removing Remote Control

 Press and hold learn button 10 seconds until the LED indicator lights on then all the learned remote controls have been removed successfully.

1.Operation Process

  

This control panel is default set to three button controls with non-latch mode.

   

Remote control button 1.2.3. is corresponding with open,close,stop.


In case you need one remote control to control more than 1 panels, you can switch the three button control mode to single button control mode by pressing the remote control button 4 for about 3 seconds, then BLUE LED indicator on.


Single button control mode: In this mode, press-open, press-stop, press-close, control panel will work in circle operation.


It cannot be switched to single button mode in the dead man mode. In single button control mode, you can select any remote control button among 1.2.3 to work with the panels by setting different dip switch.


Putting 1st dip switch to ON position, the button 1 is valid in single button mode.


Putting 2nd dip switch to ON position, the button 2 is valid in single button mode.


Putting 3rd dip switch to ON position, the button 3 is valid in single button mode.


   e.g. If you set three panels as above method, you have 1,2,3 button from same remote control to control 3 different motors separately.


   You also can set the same dip switch among 1,2,3 from different panels to ON position. Then one button from the same remote control can control more than 1 motors at the same time.


You can switch non-latch mode to dead man mode by putting the 4th dip switch to ON position.



Non-latch mode: Press the remote control button, the motor is opening, motor remains opening when you release the remote control button. Press the remote control button, the motor is closing, motor remains closing when you release the remote control button. Press the remote control button, the motor is stop, motor remains stop when you release the remote control button.


Dead man mode: Press the remote control button, the motor is opening, motor stops when you release the remote control button. Press the remote control button, the motor is closing, motor stops when you release the remote control button.


Photocell Protection. Only effective when gate is closing and normally close. It stops first and rebound back when

the photocell is working during gate closing.

   

Any external controlling switch connected to the KEY terminal block is working in single button control mode. And you can have either non-latch mode or dead man mode in single button control mode.





Send Your Inquiry Directly To This Supplier

copyright © 2018 Giant Alarm System Co.,Ltd. All Rights Reserved dyyseo.com

top

the professional team to service!