1.General
For safety, please
read the manuals carefully before initial
operation; making sure that the power is off before any operation.
The controlling signal
may be interfered by other RF
communication devices in same frequency range.
Prohibited using this to
control any high risk industrial equipment or system (e.g.cranes).
Always install it indoor or under the rain cover
protection.
2.Specification
Power Supply: AC220V/50HZ.
Loading Capacity: 2000W, AC240V.
Frequency: 433.92 MHz.
Memory Capacity: 50PCS rolling code remote
control.
External button and photocell protection.
Working Temperature: -20℃ to 60℃.
3.Learning/Removing Remote Control
Press and release the Learn button, LED indicator on, then press the
button of remote control, LED indicator flashes 2 times, new remote has been learned successfully. There
is no signal received from remote control within 10s, then LED
indicator goes off and exit learning mode.
If you have already learned 50PCS up to the maximum
memory capacity, the next remote control will not be learned. The LED indicator
will flash 5 times and exit learning mode.
3.1 Wireless
self-learning
With
this function, you could add the new remote control from the old remote control
without accessing to the receiver. Press 2 and.3 button of old remote control at the
same
time for 6 seconds, then press any button of new remote control.
3.2 Removing Remote
Control
Press and hold learn button 10
seconds until the LED
indicator lights on then all the learned remote controls have been removed successfully.
4. Product Overview
: Open Button : Stop Button : Close Button : Learn Button
:
0.5A Built-in fuse for board
: 10A Built-in fuse for motor : LED Indicator : Dip Switch For Setting Different Mode
read more
English
français
русский
español
português
中文
